Table of Contents
Advertisement
SUPPLEMENTAL RESTRAINT SYSTEM
REPLACEMENT
1.
PRECAUTION
(See page
2.
DISCONNECT BATTERY NEGATIVE TERMINAL
AVENSIS REPAIR MANUAL (RM1018E)
–
HORN BUTTON ASSY
60–1)
3.
REMOVE HORN BUTTON ASSY
(a)
Place the front wheels facing straight ahead.
(b)
Using a torx socket wrench (T30), loosen the 2 torx
screws until the groove along the screw circumference
catches on the screw case.
H42622
(c)
Pull out the horn button assy from the steering wheel assy
and support the horn button assy with one hand as shown
in the illustration.
NOTICE:
When removing the horn button assy, do not pull the airbag
wire harness.
(d)
Using a screwdriver, disconnect the airbag connectors.
(e)
Disconnect the horn connector.
(f)
Remove the horn button assy.
H43002
http://vnx.su
(See page
60–1)
60–17
6009P–04
Advertisement
Table of Contents
