Table of Contents
Advertisement
WINDSHIELD/WINDOWGLASS/MIRROR
RESET
NOTICE:
Y
The power window regulator motor must be reset when the fitting of the door glass is adjusted
or when the door glass run is replaced.
Y
Whenever disconnecting the battery terminal, reset all the other systems besides the power
window control system.
1.
RESET WINDOW REGULATOR SUB–ASSY (REGULATOR MOTOR)
(a)
Turn the ignition switch ON.
(b)
Operate the power window using the master (regulator) switch.
(c)
Disconnect the battery, fuse or motor connector while the power window is operating, so that the power
window motor is forced to stop.
(d)
Reconnect the battery, fuse or motor connector.
(e)
Pull up the power window switch until the power window is fully closed and hold the switch at least 1
second.
(f)
Check that the AUTO UP/DOWN function operates completely.
AVENSIS REPAIR MANUAL (RM1018E)
–
POWER WINDOW CONTROL SYSTEM
http://vnx.su
70–13
700SB–01
Advertisement
Table of Contents
