Table of Contents
Advertisement
WIPER RUBBER LH
REPLACEMENT
1.
REMOVE FR WIPER BLADE LH
(a)
Remove the front wiper blade LH from the front wiper arm LH.
NOTICE:
Do not fold down the front wiper arm with the front wiper blade being removed from it.
2.
REMOVE WIPER RUBBER LH
(a)
Remove the front wiper rubber LH from the front wiper blade.
(b)
Remove the 2 wiper rubber backing plates from the wiper rubber LH.
Curve
AVENSIS REPAIR MANUAL (RM1018E)
WIPER & WASHER
–
WIPER RUBBER LH
3.
INSTALL WIPER RUBBER LH
(a)
Install the 2 wiper rubber backing plates to the wiper rub-
ber LH.
NOTICE:
Be careful about the right side and the wrong side of the
backing plates.
E59361
(b)
Install the wiper rubber LH so that the head part (Larger
side) of the wiper rubber faces the arm axle side.
NOTICE:
Push the front wiper blade into the grooves of the wiper
rubber to engage them completely.
E57398
http://vnx.su
66–19
660CP–01
Advertisement
Table of Contents
