Table of Contents
Advertisement
INSPECTION
2.
INSPECT CAMSHAFT POSITION SENSOR
(a)
Using an ohmmeter, measure the resistance between the terminals.
RESISTANCE:
835 to 1,400 ( at cold
1,060 to 1,645 ( at hot
NOTICE:
"Cold" and "Hot" mean the temperature of the coils themselves."Cold" is from – 10YC (14YF) to 50
YC (122 YF) and "Hot" is from 50 YC (122 YF) to 100 YC (212 YF).
AVENSIS REPAIR MANUAL (RM1018E)
IGNITION
–
IGNITION SYSTEM (1ZZ–FE/3ZZ–FE)
1.
INSPECT SPARK PLUG
(a)
Clean the spark plugs.
If the electrode has traces of wet carbon, clean the electrode
with a spark plug cleaner then dry it.
Air pressure: Below 588 kPa (6kg/cm
Duration: 20 seconds or less
A50033
(b)
Check the spark plug for any damage on its thread and
insulator damage.
If there is damage, replace the spark plug.
Recommended spark plug:
DENSO made
NGK made
P03783
(c)
Adjust electrode gap.
Electrode gap: 1.0 to 1.1 mm (0.039 to 0.043 in.)
P03792
http://vnx.su
18–3
1807P–01
2
, 85 psi)
K16R–U11
BKR5EYA11
Advertisement
Table of Contents
