Table of Contents
Advertisement
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE HOOD/DOOR
–
BACK DOOR (LIFTBACK MODELS)
(c)
Horizontally and vertically adjust the door by loosening
the 8 door side hinge bolts.
(d)
Tighten the door side hinge bolts after the adjustment.
Torque: 19.5 N m (200 kgf cm, 14 ft lbf)
B66992
(e)
Remove the floor finish plate
(f)
Adjust the striker position by slightly loosening the striker
mounting screws and hitting the striker with a plastic–
faced hammer.
(g)
Tighten the striker mounting screws after the adjustment.
Torque: 11.5 N m (120 kgf cm, 8 ft lbf)
B66994
(h)
Adjust the side female stopper so that the door can be
opened/closed smoothly, as shown in the illustration.
(i)
Tighten the side female stopper after the adjustment.
Torque: 5.5 N m (56 kgf cm, 49 in. lbf)
B66995
http://vnx.su
75–39
(See page
76–45)
Advertisement
Table of Contents
