19–14
CHARGING SYSTEM (1AZ–FE)
PRECAUTION
1.
Check that the battery cables are connected to the correct terminals.
2.
Disconnect the battery cables when the battery is given a quick charge.
3.
Do not perform tests with a high voltage insulation resistance tester.
4.
Never disconnect the battery while the engine is running.
5.
Check that the charging cable is tightened on terminal B of the generator and the fuse box.
AVENSIS REPAIR MANUAL (RM1018E)
STARTING & CHARGING
–
http://vnx.su
CHARGING SYSTEM (1AZ–FE)
190NV–01