Table of Contents
Advertisement
73–10
THEFT DETERRENT & DOOR LOCK
Open–latch
AVENSIS REPAIR MANUAL (RM1018E)
9.
(a)
If the result is not as specified, replace the door lock assy.
Full–latch
(b)
B66817
If the result is not as specified, replace the door lock assy.
(c)
If the result is not as specified, replace the door lock assy.
http://vnx.su
–
POWER DOOR LOCK CONTROL SYSTEM
INSPECT BACK DOOR LOCK ASSY (SEDAN
MODELS)
Check operation of the door lock.
(1)
Using a screwdriver, push the latch in order to put
the back door lock in the locked condition (full–latch
position).
(2)
Apply battery voltage to the door lock and check op-
eration of the latch.
Standard:
Measurement Condition
Battery positive (+) " Terminal 1
Battery negative (–) " Terminal 3
Apply battery voltage to the door lock motor and check
motor operation.
Standard:
Measurement Condition
Battery positive (+) " Terminal 3
Battery negative (–) " Terminal 1
Battery positive (+) " Terminal 1
Battery negative (–) " Terminal 3
Check the resistance of the courtesy switch.
Standard:
Tester Connection
Door Lock Latch Position
Open–latch position
2 3
2 – 3
Full–latch position
Specified Condition
Latch turns to open–latch position
Specified Condition
Clockwise Motor in normal rotation
Counterclockwise (Motor in reverse rota-
tion)
Specified Condition
Below 1 f
10 kf or higher
Advertisement
Table of Contents
