Toyota Avensis ZZT251 2003 Service And Repair Manual page 1056

DRIVE SHAFT / PROPELLER SHAFT
SST
SST
16. INSTALL DISC BRAKE DUST COVER FRONT LH
(a) Install the disc brake dust cover with the 3 bolts.
Torque: 8.3 N m (85 kgf cm, 73 in. lbf)
SST
AVENSIS REPAIR MANUAL (RM1018E)
14. REMOVE FRONT AXLE HUB LH BEARING
(a) Place the bearing inner race (outside) on the axle hub LH
SST
bearing.
(b) Using SST and a press, remove the axle hub LH bearing
from the steering knuckle.
SST
F40230
15. INSTALL FRONT AXLE HUB LH BEARING
(a) Using SST and a press, install a new axle hub LH bearing
to the steering knuckle.
SST
F40231
17. INSTALL FRONT AXLE HUB SUB–ASSY LH
(a) Using SST and a press, install the axle hub sub–assy.
SST
SST
F40232
18. INSTALL FRONT AXLE HUB LH HOLE SNAP RING
(a) Using snap ring pliers, install the hole snap ring.
F40229
http://vnx.su
– FRONT AXLE HUB SUB–ASSY LH
09527–17011, 09950–60010 (09951–00640),
09950–70010 (09951–07100)
09950–60020 (09951–00720), 09950–70010
(09951–07100)
09608–32010, 09950–60010 (09951–00600),
09950–70010 (09951–07100)
30–25