Table of Contents
Advertisement
17–32
OIL COOLER ASSY (1CD–FTV)
REPLACEMENT
1.
DRAIN ENGINE COOLANT
2.
DRAIN ENGINE OIL
3.
REMOVE ENGINE UNDER COVER LH
New O–Ring
New O–Ring
6.
ADD ENGINE OIL
7.
ADD ENGINE COOLANT
8.
CHECK FOR ENGINE OIL LEAKS
9.
CHECK FOR ENGINE COOLANT LEAKS
AVENSIS REPAIR MANUAL (RM1018E)
LUBRICATION
(See page
16–44)
(See page
17–30)
4.
(a)
(b)
(c)
(d)
B14352
5.
(a)
(b)
(c)
B14354
(d)
(e)
(f)
(g)
B14355
(See page
17–30)
(See page
16–44)
(See page
http://vnx.su
–
OIL COOLER ASSY (1CD–FTV)
REMOVE OIL COOLER ASSY
Disconnect the 2 cooler hoses from the oil cooler.
Remove the union bolt and the oil cooler.
Remove the O–ring from the oil cooler.
Remove the O–ring from the union bolt.
INSTALL OIL COOLER ASSY
Clean the oil cooler mounting surface.
Install a new O–ring to the union bolt.
Install a new O–ring to the oil cooler.
Apply a light coat of engine oil on the threads of the union
bolt.
Align the tab of the oil cooler with the tab located on the
cylinder block.
Install the oil cooler with the union bolt.
Torque: 45 N m (454 kgf cm, 33 ft lbf)
Connect the 2 cooler hoses to the oil cooler.
16–44)
170FQ–01
Advertisement
Table of Contents
