Table of Contents
Advertisement
OVERHAUL
HINT:
Overhaul the RH side by using the same procedures as those for the LH side.
1.
REMOVE FRONT WHEEL
2.
DRAIN BRAKE FLUID
NOTICE:
Wash the brake fluid off immediately if it adheres to any painted surface.
Union Bolt
Cylinder Slide Pin
Cylinder Slide Bush
Cylinder Slide Pin (No.2)
AVENSIS REPAIR MANUAL (RM1018E)
BRAKE
–
FRONT BRAKE
3.
REMOVE DISC BRAKE CYLINDER ASSY LH
(a)
Remove the union bolt and gasket from the disc brake cyl-
inder assy LH, then disconnect the flexible hose.
(b)
Hold the front disc brake cylinder slide pin and remove the
2 bolts.
F45421
4.
REMOVE FRONT DISC BRAKE PAD KIT
(a)
Remove the disc brake pad kit front from the front disc
brake cylinder mounting LH.
(b)
Remove the 2 front disc brake pad support plates No.2
and 2 front disc brake pad support plates No.1.
G23232
5.
REMOVE FRONT DISC BRAKE CYLINDER SLIDE PIN
KIT
(a)
Remove the front disc brake cylinder slide pin (No.1) and
front disc brake cylinder slide pin (No.2) from the front disc
brake cylinder mounting LH.
F45419
(b)
Remove the front disc brake cylinder slide bush from the
bottom side of the front disk brake cylinder slide pin
(No.2).
F45417
http://vnx.su
32–41
320W1–01
Advertisement
Table of Contents
