Table of Contents
Advertisement
AVENSIS REPAIR MANUAL (RM1018E)
AUDIO & VISUAL SYSTEM
–
(j)
Remove the 4 screws and the multi–display.
I35183
8.
INSTALL MULTI–DISPLAY (CRT DISPLAY) DISPLAY
(a)
Install the multi–display with the 4 screws.
NOTICE:
Tighten each screw together with the earth wire.
I35184
(b)
Insert the flexible flat cable as deep as possible and install
it by sliding the lock of the connector in the arrow direction
shown in the illustration.
I35185
9.
INSTALL CONTROL KNOB PROTECTOR NO.1
(a)
Fit the protrusion of the position sensor into the groove
shown in the illustration to fix.
(b)
Install the control knob protector No.1.
I35186
http://vnx.su
MULTI–DISPLAY (CRT DISPLAY) DISPLAY
67–9
Advertisement
Table of Contents
