41–8
MANUAL TRANSMISSION/TRANSAXLE
AVENSIS REPAIR MANUAL (RM1018E)
–
TRANSMISSION CONTROL CABLE ASSY (MTM)
(d)
Remove the 2 bolts, separate the control cable assy.
D30071
(e)
Remove the 2 clips, separate the cable ends of the control
cable assy.
D26893
(f)
Release the claws, remove the control cable assy.
D26895
5.
INSTALL TRANSMISSION CONTROL CABLE ASSY
(a)
Put the control cable assy through the floor hole.
(b)
Install the control cable assy with the 2 bolts.
Torque: 5.0 N m (51 kgf cm, 44 in. lbf)
D30071
(c)
Connect the control cable assy to the shift lever assy.
NOTICE:
Make sure that the claws are firmly engaged.
D26972
http://vnx.su