Front Shock Absorber With Coil Spring Overhaul - Toyota Avensis ZZT251 2003 Service And Repair Manual

26–10
FRONT SHOCK ABSORBER WITH COIL SPRING
OVERHAUL
HINT:
Y
COMPONENTS:
Y
This procedure is provided for the overhaul on the LH side. Overhaul the other side by the same proce-
dure as the LH side.
1. REMOVE FRONT WHEEL
AVENSIS REPAIR MANUAL (RM1018E)
FRONT SUSPENSION
See page 26–2
2.
(a)
HINT:
If the ball joint turns together with the nut, use a hexagon (6 mm)
wrench to hold the stud.
F13686
3.
(a)
C80880
(b)
F13683
(c)
(d)
F44622
http://vnx.su
– FRONT SHOCK ABSORBER WITH COIL SPRING
SEPARATE FRONT STABILIZER LINK ASSY LH
Remove the nut and disconnect the stabilizer bar link from
the shock absorber.
REMOVE FRONT SHOCK ABSORBER WITH COIL
SPRING
Remove the bolt, disconnect the front flexible hose and
speed sensor front LH.
Remove the 2 nuts and bolts on the lower side of the
shock absorber.
Remove the 3 nuts on the upper side of the shock absorb-
er.
Remove the shock absorber with the coil spring.
2600M–04