Table of Contents
Advertisement
27–12
20.
INSTALL REAR STABILIZER LINK ASSY RH
HINT:
Install the RH side by the same procedures as the LH side.
22.
INSTALL REAR WHEEL
Torque: 103 N m (1,050 kgf cm, 76 ft lbf)
23.
STABILIZE SUSPENSION
(a)
Bounce the vehicle up and down several times to stabilize the suspension.
AVENSIS REPAIR MANUAL (RM1018E)
REAR SUSPENSION
–
REAR SHOCK ABSORBER WITH COIL SPRING
(c)
Install the rear suspension arm assy No.1 LH with the 3
bolts.
Torque: 65 N m (663 kgf cm, 48 ft lbf)
G23868
(d)
Connect the parking brake cable assy No.3 with the 2
bolts.
Torque: 5.0 N m (51 kgf cm, 44 in. lbf)
G23867
19.
INSTALL REAR STABILIZER LINK ASSY LH
(a)
Install the rear stabilizer link assy LH with the nut.
Torque: 44 N m (449 kgf cm, 32 ft lbf)
HINT:
If the ball joint turns together with the nut, use a hexagon (5 mm)
wrench to hold the stud.
G25772
21.
CONNECT SKID CONTROL SENSOR WIRE
(a)
Install the wire bracket and bolt.
Torque: 5.0 N m (51 kgf cm, 44 in. lbf)
(b)
Connect the skid control sensor connector.
G25771
http://vnx.su
Advertisement
Table of Contents
