41–12
MANUAL TRANSMISSION/TRANSAXLE
Serrate Part
AVENSIS REPAIR MANUAL (RM1018E)
–
FLOOR SHIFT SHIFT LEVER ASSY (MTM)
8.
CONNECT TRANSMISSION CONTROL CABLE ASSY
(a)
Connect the control cable assy to the shift lever assy.
NOTICE:
Make sure that the claws are firmly engaged.
D26972
(b)
Connect the end of the select cable to the shift lever assy,
install the clip.
NOTICE:
Y
The serrate part of the select cable point should face
upward when the select cable point is connected.
Y
The clip should be inserted to the direction as shown
in the illustration.
(c)
Connect the end of the shift cable to the shift lever assy.
D26894
http://vnx.su