Table of Contents
Advertisement
Lock Position
PS Gear
Open
SST(s)
AVENSIS REPAIR MANUAL (RM1018E)
POWER STEERING
–
(k)
With the engine idling and valve fully opened, turn the
steering wheel to full lock position.
Oil
Minimum fluid pressure:
Reservoir
AZ Series:
8,300 to 9,000 kPa (85 to 92 kgf/cm
1CD–FTV:
8,800 to 9,500 kPa (90 to 97 kgf/cm
PS Vane
Pump
NOTICE:
Y
Do not maintain lock position for more than 10 se-
Z15500
conds.
Y
Do not let the fluid temperature become too high.
(l)
Remove SST(s).
(m)
AZ Series:
Connect the pressure feed tube assy to the vane pump
assy
(n)
1CD–FTV:
Connect the pressure feed tube assy to the vane pump
assy
(o)
Bleed the power steering system.
5.
CHECK STEERING EFFORT
(a)
Center the steering wheel.
(b)
Remove the steering wheel pad
(c)
Start the engine and run it at idle.
(d)
Measure the steering effort in both directions.
Steering effort (Reference):
5.5 N·m (56 kgf·cm, 49 in.·lbf)
HINT:
Take the tire type, pressure and contact surface into consider-
F08858
ation before making your diagnosis.
(e)
Torque the steering wheel set nut.
Torque: 50 N·m (510 kgf·cm, 37 ft·lbf)
(f)
Install the steering wheel pad
http://vnx.su
POWER STEERING SYSTEM
(See page
51–9).
(See page
51–19).
51–7
2
, 1,204 to 1,305 psi)
2
, 1,276 to 1,378 psi)
(See page
60–17).
(See page
60–17).
Advertisement
Table of Contents
