Toyota Avensis ZZT251 2003 Service And Repair Manual page 1054

DRIVE SHAFT / PROPELLER SHAFT
6. REMOVE FRONT DISC
Turn
Hold
AVENSIS REPAIR MANUAL (RM1018E)
7.
SST
(a)
(b)
F40217
8.
(a)
C80293
9.
(a)
NOTICE:
Be careful not to damage the boot and ABS speed sensor
rotor.
D27403
(b)
C83023
http://vnx.su
– FRONT AXLE HUB SUB–ASSY LH
SEPARATE TIE ROD END SUB–ASSY LH
Remove the cotter pin and nut.
Using SST, separate the tie rod end sub–assy LH from the
steering knuckle.
SST 09628–62011
SEPARATE FRONT SUSPENSION ARM SUB–ASSY
LOWER NO.1 LH
Remove the bolt and 2 nuts, and separate the suspension
arm sub–assy lower No.1 LH from the lower ball joint.
REMOVE FRONT AXLE ASSY LH
Using a plastic hammer, separate the drive shaft assy LH
from the axle hub.
Remove the 2 bolts, nuts and steering knuckle with the
shock absorber.
30–23