Toyota Avensis ZZT251 2003 Service And Repair Manual page 844

Socket Wrench
29
B
Cord Clip
A
11. INSTALL GENERATOR HOLDER W/RECTIFIER
(a) Install the holder w/ rectifier with 4 screws.
Torque: 2.9 N m (30 kgf cm, 26 in. lbf)
12. INSTALL GENERATOR REGULATOR ASSY
(a) Install the regulator with the 3 screw.
Torque: 2.0 N m (20 kgf cm, 18 in. lbf)
Protrusion
1ZZ–FE,3ZZ–FE ENGINE REPAIR MANUAL
(RM923E)
STARTING & CHARGING –
10. INSTALL GENERATOR ROTOR ASSY
(a) Install the rotor to the drive end frame.
B00219
(b) Using a socket wrench 29 and press, slowly press in the
rectifier end frame.
B00211
(c) Install the cord clip and 4 nuts.
A
Torque:
Nut A 4.5 N m (46 kgf cm, 40 in. lbf)
Nut B 5.4 N m (55 kgf cm, 48 in. lbf)
A
A62763
13. INSTALL GENERATOR BRUSH HOLDER ASSY
(a) Install the brush holder with the 2 screws.
Torque: 2.0 N m (20 kgf cm, 18 in. lbf)
NOTICE:
Pay attention to the holder installation direction.
A62764
http://vnx.su
GENERATOR ASSY (1ZZ–FE/3ZZ–FE)
19–13