Toyota Avensis ZZT251 2003 Service And Repair Manual page 1041

Toe–in:
(Normal package)
Toe–in
(Rough road package)
Toe–in
Camber:
(Normal package)
Camber
(Rough road package)
Camber
AVENSIS REPAIR MANUAL (RM1018E)
REAR SUSPENSION
(d)
(e)
(f)
HINT:
Adjust the camber and toe–in to the center of the specified val-
ues as much as possible.
G23877
(total)
(total)
Right–left error
Right–left error
(g)
(h)
CAMBER ADJUSTING CAM ASSY
Inward Outward
Shorter
Longer
TIE ROD ADJUSTING TUBE
http://vnx.su
– REAR WHEEL ALIGNMENT
Loosen the camber adjusting cam assy set nut.
Loosen the tie rod adjusting tube set nut.
Adjust the camber and toe–in by turning the adjusting
cam and adjusting tube.
A + B: 0 (C' B 6' (0.3 B 0.1 )
C – D: 3.0 x 1.0 mm (0.12 x 0.04 in.)
A + B: 0 (C' B 6' (0.3 B 0.1 )
C – D: 3.0 x 1.0 mm (0.12 x 0.04 in.)
–0 FE' B 20' (–0.9 B 0.3 )
30' (0.5 ) or less
–0 )-' B 20' (–0.5 B 0.3 )
30' (0.5 ) or less
Tighten the camber adjusting cam assy set nut.
Torque: 74 N m (755 kgf cm, 55 ft lbf)
Tighten the tie rod adjusting tube set nut.
Torque: 56 N m (571 kgf cm, 41 ft lbf)
Outward Inward
Front
Shorter
Longer
27–5
G23886