Toyota Avensis ZZT251 2003 Service And Repair Manual page 1257

LH:
A
B
B
RH:
A
B
B
A
A
B
B
AVENSIS REPAIR MANUAL (RM1018E)
POWER STEERING –
43. INSTALL FRONT SUSPENSION CROSSMEMBER
SUB–ASSY
(a) Using a transmission jack, support the crossmember
sub–assy w/power steering gear assy.
(b) Install the 2 stopper front onto the crossmember sub–
assy.
(c) Install the crossmember sub–assy with the 2 nuts.
Torque: 133 N m (1,356 kgf cm, 98 ft lbf)
C94598
(d) Install the stopper rear onto the crossmember bracket LH.
(e) Install the crossmember bracket LH with the 4 bolts.
Torque:
Bolt A: 133 N m (1,356 kgf cm, 98 ft lbf)
Bolt B: 80 N m (816 kgf cm, 59 ft lbf)
B
C94596
(f) Install the stopper rear onto the crossmember bracket
RH.
(g) Install the crossmember bracket RH with the 4 bolts.
Torque:
Bolt A: 133 N m (1,356 kgf cm, 98 ft lbf)
Bolt B: 80 N m (816 kgf cm, 59 ft lbf)
B
C94597
(h) Install the engine mounting insulator RR to the cross-
member sub–assy with the bolt and the 3 nuts.
Torque: 52 N m (530 kgf cm, 38 ft lbf)
C94595
(i) Install the center member with the 4 bolts.
Torque:
Bolt A: 45 N m (459 kgf cm, 33 ft lbf)
Bolt B: 52 N m (530 kgf cm, 38 ft lbf)
D29969
http://vnx.su
RACK & PINION POWER STEERING GEAR ASSY
51–43