Table of Contents
Advertisement
THEFT DETERRENT & DOOR LOCK
POWER DOOR LOCK CONTROL SYSTEM
ON–VEHICLE INSPECTION
1.
DOOR LOCK FAIL–SAFE
(a)
When a malfunction in the door control switch (manual switch, driver's door lock) has been detected,
door lock/unlock operation becomes disabled.
2.
CHECK ELECTRICAL DOOR LOCK OPERATION
(a)
Check the basic function.
(1)
Check that all doors lock when the door control switch (for manual operation) is turned to LOCK
and all doors unlock when turned to UNLOCK.
(2)
Check that all doors lock when the driver's door is locked from the outside using the key. Check
that all doors unlock when the driver's door is unlocked from the outside using the key.
(b)
Check the key lock–in prevention function.
NOTICE:
In order to prevent the key from being locked in, the inspection should be made with the driver side
door glass open.
(1)
Have the key inserted into the ignition key cylinder.
(2)
With the driver side door open, check that all doors unlock immediately after the door lock knob
for the driver side door is turned to LOCK.
(3)
With the driver side door open, check that all doors unlock immediately after the door control
switch (for manual operation) is turned to LOCK.
(4)
With the driver side door open, turn the driver side door lock knob to LOCK and hold it for 2 se-
conds or more, and then close the driver side door. Then check that all doors unlock.
(c)
Check the security function.
(1)
Close all doors with the driver side door glass open so that the door control switch can be oper-
ated from outside the vehicle
(2)
Pull out the key, open the driver side door and then close and lock the door without using the
key. Then, check that all doors do not unlock when the door control switch (for manual operation)
is turned to UNLOCK from outside the vehicle.
(3)
Pull out the key, close and lock the driver side door by key operation. Under this condition, check
that all doors do not unlock when the door control switch (for manual operation) is turned to UN-
LOCK from outside the vehicle.
(4)
Pull out the key, close the driver side door and lock the door by wireless door lock operation.
Then, check that all doors do not unlock when the door control switch (for manual operation) is
turned to UNLOCK from outside the vehicle.
HINT:
Check that the security function is canceled under the following conditions.
Y
The ignition switch is turned ON.
Y
The driver side door is unlocked using the key.
Y
The door control switch (for manual operation) is turned to UNLOCK after the door control knob is
turned to UNLOCK manually.
Y
The doors are unlocked with wireless operation.
AVENSIS REPAIR MANUAL (RM1018E)
–
POWER DOOR LOCK CONTROL SYSTEM
http://vnx.su
73–1
730GV–01
Advertisement
Table of Contents
