Toyota Avensis ZZT251 2003 Service And Repair Manual page 1016

10. SUSPEND ENGINE ASSY
(a) 1ZZ, 3ZZ Engine:
(b) 1AZ Engine: See page 41–24
(c) 1CD Engine: See page 41–33
11. REMOVE FRONT SUSPENSION MEMBER BRACE REAR LH
12. REMOVE FRONT SUSPENSION MEMBER BRACE REAR RH
HINT:
Remove the RH side by the same procedures as the LH side.
13. SEPARATE FRONT SUSPENSION CROSSMEMBER SUB–ASSY
14. REMOVE FRONT STABILIZER BRACKET NO.1 LH
(a) Remove the 2 bolts and the front stabilizer bracket No.1 LH.
16. REMOVE FRONT STABILIZER BAR BUSH NO.1
(a) Remove the 2 bushings from the stabilizer bar.
17. REMOVE STABILIZER BAR FRONT
18. INSTALL STABILIZER BAR FRONT
Inner Side
CF-)(E
20. INSTALL FRONT STABILIZER BRACKET NO.1 LH
(a) Install the front stabilizer bracket No.1 LH with the 2 bolts.
Torque: 19 N m (194 kgf cm, 14 ft lbf)
AVENSIS REPAIR MANUAL (RM1018E)
FRONT SUSPENSION
See page 41–15
15.
(a)
(b)
F45155
19.
(a)
HINT:
Install the bushing to the outer side of the bushing stopper on
the stabilizer bar.
Rear
Side
F40197
http://vnx.su
– STABILIZER BAR FRONT
(See page
REMOVE FRONT STABILIZER BRACKET NO.1 RH
w/ HID:
Remove the 3 bolts, the front stabilizer bracket No.1 RH
and the height control sensor (Front).
w/o HID:
Remove the 2 bolts and the front stabilizer bracket No.1
RH.
INSTALL FRONT STABILIZER BAR BUSH NO.1
Install the 2 front stabilizer bar bush No.1 to the stabilizer
bar front as shown in the illustration.
26–16)
(See page 26–16)
26–27