Toyota Avensis ZZT251 2003 Service And Repair Manual page 1374

55–94
8. REMOVE HIGH PITCHED HORN ASSY
9. REMOVE LOW PITCHED HORN ASSY
AVENSIS REPAIR MANUAL (RM1018E)
HEATER & AIR CONDITIONER
5. REMOVE DISCHARGE TUBE SUB–ASSY (W/ HOT
GAS HEATER)
(a) Remove the 2 bolts and disconnect the discharge tube
sub–assy from the w/ receiver condenser assy.
(b) Remove 2 O–rings from the discharge tube sub–assy.
NOTICE:
Seal the opening of the disconnected parts using vinyl tape
to prevent moisture and foreign matters from entering.
I35337
6. REMOVE
(RHD(1CD–FTV) STEERING POSITION TYPE)
(a) Remove the bolt and disconnect the liquid tube sub–assy
B from w/ receiver condenser assy.
(b) Remove the O–ring from the liquid tube sub–assy B.
NOTICE:
Seal the opening of the disconnected parts using vinyl tape
to prevent moisture and foreign matters from entering.
I35336
7. REMOVE HOOD LOCK ASSY
(a) Remove the 3 bolts and the hood lock assy.
I35339
(See page
(See page
10. REMOVE HOOD LOCK SUPPORT BRACE
(a) Remove the 5 bolts and the hood lock support brace.
I35340
http://vnx.su
– W/RECEIVER CONDENSER ASSY
LIQUID
69–5)
69–4)
TUBE SUB–ASSY B