Toyota Avensis ZZT251 2003 Service And Repair Manual page 1220

LHD:
Torque Sensor Wire Harness Clamp
Power Steering ECU Assy
Bolt (A)
Screw
Motor Wire Harness
AVENSIS REPAIR MANUAL (RM1018E)
STEERING COLUMN – POWER STEERING ECU ASSY
Torque Sensor Wire Harness Clamp
Marks
Front
Bolt (B)
Bolt (B)
Motor Wire Harness
Torque Sensor
Wire Harness
17. INSTALL POWER STEERING ECU ASSY
(a) LHD:
Install the power steering ECU assy with the 2 bolts and
screw.
Torque:
BOLT (A): 8.0 N m (82 kgf cm, 71 in. lbf)
BOLT (B): 15.5 N m (158 kgf cm, 11 ft lbf)
(b) RHD:
Install the power steering ECU assy with the 2 bolts and
2 screws.
Torque:
BOLT (A): 8.0 N m (82 kgf cm, 71 in. lbf)
BOLT (B): 15.5 N m (158 kgf cm, 11 ft lbf)
(c) Connect the 4 connectors.
(d) Align the marks on the torque sensor wire harness with
the clamp, as shown in the illustration.
http://vnx.su
RHD:
Power Steering ECU Assy
Front
Torque Sensor
Wire Harness
50–21
Marks
Bolt (A)
Screw
F44857 F44857