Toyota Avensis ZZT251 2003 Service And Repair Manual page 1118

Front Disc Brake Cylinder Mounting
Bush Dust Boot
Lithium soap base glycol grease
Cylinder Slide Pin
Lithium soap base glycol grease
27. INSTALL REAR DISC BRAKE PAD KIT
(a) Install the 2 rear disc brake pad support plates No.1 and 2 rear disc brake pad support plate No.2 to
the rear disc brake cylinder mounting LH.
(b) Install the disc brake pad kit rear to the disc brake cylinder mounting LH.
Union bolt
29. FILL RESERVOIR WITH BRAKE FLUID
30. BLEED MASTER CYLINDER
(a) w/o VSC:
SST 09023–00100
(b) w/ VSC:
SST 09023–38400
31. BLEED BRAKE LINE
32. CHECK FLUID LEVEL IN RESERVOIR
AVENSIS REPAIR MANUAL (RM1018E)
BRAKE
25. INSTALL REAR DISC BRAKE BUSH DUST BOOT
(a) Apply lithium soap base glycol grease to the sealing sur-
face of 2 new bush dust boots.
(b) Install the 2 bush dust boots to the rear disc brake cylinder
mounting LH.
F45439
26. INSTALL REAR DISC BRAKE CYLINDER SLIDE PIN
KIT
(a) Apply lithium soap base glycol grease to sealing surface
of a new cylinder slide bush.
(b) Install the rear disc brake cylinder slide bush to the bottom
side of the rear disc brake cylinder slide pin (No.2).
(c) Apply lithium soap base glycol grease to the sliding part
and the sealing surface of the 2 rear disc brake cylinder
slide pins.
F45701
(d) Install the rear disc brake cylinder slide pin (No.1) and rear
disc brake cylinder slide pin (No.2) to the rear disc brake
cylinder mounting LH.
28. INSTALL DISC BRAKE CYLINDER ASSY REAR LH
(a) Install the disc brake cylinder assy rear LH with the 2 bolts.
Torque: 30 N m (306 kgf cm, 22 ft lbf)
(b) Install a new gasket and flexible hose with the union bolt.
Torque: 29 N m (296 kgf cm, 21 ft lbf)
HINT:
Install the flexible hose lock securely in to the lock hole in the
disc brake cylinder assy rear LH.
G23181
(See page
(See page 32–4)
(See page 32–4)
(See page
http://vnx.su
– REAR BRAKE
32–4)
32–4)
32–51