27–10
SST
E--)(-
AVENSIS REPAIR MANUAL (RM1018E)
REAR SUSPENSION
–
15.
REMOVE SHOCK ABSORBER ASSY REAR LH
(a)
Using SST, compress the coil rear spring.
SST
NOTICE:
Do not use an impact wrench. It will damage the SST.
C95735
(b)
Using a 6 mm hexagon wrench to hold the piston rod, re-
move the nut.
C95736
(c)
Remove the rear shock absorber cushion washer No.1.
Rear shock
(d)
Remove the rear suspension support assy LH.
absorber
(e)
Remove the rear spring front bracket sub–assy LH.
cushion
(f)
Remove the rear shock absorber cushion No.1.
No.1
(g)
Remove the rear spring bumper No.1 LH.
Rear
(h)
Remove the rear coil spring insulator upper LH.
suspension
(i)
Remove the coil rear spring.
support
assy LH
G24415
16.
INSPECT SHOCK ABSORBER ASSY REAR LH
(a)
Compress and extend the shock absorber rod and check
for unusual resistance or unusual sound during the op-
eration.
If there is any malfunction, replace the shock absorber assy
rear LH with a new one.
G23869
17.
INSTALL SHOCK ABSORBER ASSY REAR LH
(a)
Using SST, compress the coil rear spring.
SST
NOTICE:
Do not use an impact wrench. It will damage the SST.
SST
F40128
http://vnx.su
REAR SHOCK ABSORBER WITH COIL SPRING
09727–30021 (09727–00010, 09727–00021,
09727–00031)
09727–30021 (09727–00010, 09727–00021,
09727–00031)