27–30
Stopper Ring
Inner side
7.
INSTALL REAR STABILIZER LINK ASSY RH
HINT:
Install the RH side by the same procedures as the LH side.
8.
INSPECT AND ADJUST REAR WHEEL ALIGNMENT
AVENSIS REPAIR MANUAL (RM1018E)
REAR SUSPENSION
–
STABILIZER BAR REAR
5.
INSTALL STABILIZER BAR REAR
(a)
Install the 2 stabilizer bush rear to each stabilizer bar rear.
HINT:
Install the stabilizer bush rear to the outer side of the stopper
ring on the stabilizer bar.
G23878
(b)
Install the stabilizer bar rear and 2 rear stabilizer bar
bracket No.3 with 2 bolts and 2 nuts.
Torque: 35 N m (357 kgf cm, 26 ft lbf)
G23876
6.
INSTALL REAR STABILIZER LINK ASSY LH
(a)
Install the rear stabilizer link assy LH with the 2 nuts.
Torque: 44 N m (449 kgf cm, 32 ft lbf)
HINT:
If the ball joint turns together with the nut, use a hexagon (5 mm)
wrench to hold the stud.
G25774
http://vnx.su
(See page
27–4)