Toyota Avensis ZZT251 2003 Service And Repair Manual page 1719

THEFT DETERRENT & DOOR LOCK
Full–latch
Open–latch
AVENSIS REPAIR MANUAL (RM1018E)
– POWER DOOR LOCK CONTROL SYSTEM
10. INSPECT BACK DOOR LOCK ASSY (WAGON
MODELS)
(a) Check operation of the door lock.
(1) Using a screwdriver, push the latch in order to put
the back door lock in the locked condition (full–latch
position).
(2) Apply battery voltage to the door lock and check op-
eration of the latch.
Standard:
Measurement Condition
Battery positive (+) " Terminal 4
Battery negative (–) " Terminal 3
If the result is not as specified, replace the door lock assy.
(b) Apply battery voltage to the door lock motor and check
motor operation.
Standard:
Measurement Condition
Battery positive (+) " Terminal 4
Battery negative (–) " Terminal 3
B66815
Battery positive (+) " Terminal 3
Battery negative (–) " Terminal 4
If the result is not as specified, replace the door lock assy.
(c) Check the resistance of the courtesy switch.
Standard:
Tester Connection
1 – 2 1 2
If the result is not as specified, replace the door lock assy.
http://vnx.su
Specified Condition
Latch turns to open–latch position
Specified Condition
Clockwise Motor in normal rotation
Counterclockwise (Motor in reverse rota-
tion)
Door Lock Latch Position Specified Condition
Open–latch position
Full–latch position
73–11
Below 1 f
10 kf or higher