Rear Shock Absorber With Coil Spring Ovehaul - Toyota Avensis ZZT251 2003 Service And Repair Manual

27–8
REAR SHOCK ABSORBER WITH COIL SPRING
OVERHAUL
HINT:
COMPONENTS: See page
1. REMOVE REAR DOOR SCUFF PLATE LH
2. REMOVE REAR SEAT CUSHION ASSEMBLY
(a) 40/60 FOLDING FLIP–UP CUSHION
(b) 40/60 FOLDING (See page
(c) UNITED FIXED (See page
3. REMOVE REAR SEATBACK ASSY
(a) 40/60 FOLDING FLIP–UP CUSHION
(b) 40/60 FOLDING (See page
(c) UNITED FIXED (See page
4. REMOVE REAR FLOOR FINISH PLATE (SEDAN MODELS)
5. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER LH (SEDAN MODELS)
6. REMOVE REAR FLOOR FINISH PLATE (LIFTBACK MODELS)
7. REMOVE DECK TRIM SIDE BOARD LH (LIFTBACK MODELS)
8. REMOVE REAR FLOOR FINISH PLATE (WAGON MODELS)
9. REMOVE DECK TRIM SIDE PANEL ASSY LH (WAGON MODELS)
10. REMOVE REAR WHEEL
13. SEPARATE REAR STABILIZER LINK ASSY RH
HINT:
Separate the RH side by the same procedures as the LH side.
AVENSIS REPAIR MANUAL (RM1018E)
REAR SUSPENSION
27–2.
(See page
72–27)
72–32)
(See page
72–27)
72–32)
11. DISCONNECT SKID CONTROL SENSOR WIRE
(a) Disconnect the skid control sensor connector.
(b) Remove the bolt and wire bracket.
G25771
12. SEPARATE REAR STABILIZER LINK ASSY LH
(a) Remove the nut, and separate the rear stabilizer link assy
LH.
HINT:
If the ball joint turns together with the nut, use a hexagon (5 mm)
wrench to hold the stud.
G25772
http://vnx.su
– REAR SHOCK ABSORBER WITH COIL SPRING
72–21)
72–21)
(See page
(See page
270E8–01
76–45)
76–54)