Table of Contents
Advertisement
75–44
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE HOOD/DOOR
–
BACK DOOR (WAGON MODELS)
(c)
Horizontally and vertically adjust the door by loosening
the door side hinge bolts.
(d)
Tighten the door side hinge bolts after the adjustment.
Torque: 26 N m (265 kgf cm, 19 ft lbf)
B66999
(e)
Remove the floor finish plate
(f)
Adjust the striker position by slightly loosening the striker
mounting 2 screws and hitting the striker with a plastic–
faced hammer.
(g)
Tighten the striker mounting screws after the adjustment.
Torque: 23 N m (235 kgf cm, 17 ft lbf)
B67001
http://vnx.su
(See page
76–54)
Advertisement
Table of Contents
