50–18
52.
CONNECT POWER STEERING ECU ASSY (ELECTRIC POWER STEERING)
(a)
Connect the 2 connectors.
(b)
Align the marks on the torque sensor wire harness with the clamp, as shown in the illustration.
NOTICE:
Y
When reusing the clamp, check that there is no damage on it.
Y
When reinstalling the wire harness, make sure there is no twist in the harness or with other wire
harness.
LHD:
Torque Sensor Wire Harness Clamp
Power Steering ECU Assy
Motor Wire Harness
AVENSIS REPAIR MANUAL (RM1018E)
STEERING COLUMN
–
STEERING COLUMN ASSY
Torque Sensor Wire Harness Clamp
Marks
Front
Motor Wire Harness
Torque Sensor
Wire Harness
53.
INSTALL STEERING COLUMN PROTECTOR NO.1
(a)
Install the steering column protector with the 2 bolts.
Torque: 5 N m (51 kgf cm, 44 ft lbf)
(b)
Connect the wire harness clamp to the steering colum
protector No.1.
F44786
http://vnx.su
RHD:
Power Steering ECU Assy
Front
Torque Sensor
Wire Harness
Marks
F44857
F44857