Passenger's Seat; Only For The Models Without The Front Passenger's Frontal Airbag On/Off Indicator - When Installing Child Restraint Systems To The Front Passenger's Seat - Subaru Impreza 2017 Owner's Manual

Hide thumbs Also See for Impreza 2017:
Table of Contents

Advertisement

& Only for the models without
the front passenger's frontal
airbag ON/OFF indicator -
When installing child re-
straint systems to the front

passenger's seat

WARNING
. Never install a rearward facing
child restraint system. Other-
wise, there is an increased risk
of injury to the child when the
airbags are deployed, even when
a child restraint system is used.
. When you install a child restraint
system, follow the manufac-
turer's instructions supplied with
it. After installing the child re-
straint system, check to ensure
that it is held securely in posi-
tion. If it is not held tight and
secure, the danger in the event of
an accident may be increased.
. Do not place the removed head
restraint in the passenger com-
partment to prevent it from being
thrown around in a sudden stop
or a sharp turn.
. When the SRS airbag system
warning indicator illuminates, in-
Seat, seatbelt and SRS airbags/Child restraint systems
stall the child restraint system to
the rear seat.
CAUTION
For safety reasons, always install a
child restraint system to the rear
seat. When it is unavoidable, only
forward facing child restraint sys-
tem can be installed in the front
passenger's seat. For details, refer
to "When installing the child re-
straint system to the front passen-
ger's seat" F1-37.
! When installing the child restraint
system to the front passenger's
seat
When you install a child restraint system
to the front passenger s seat, perform the
following procedure.
1. Adjust the front passenger s seat as
follows.
A)
Seat position: Rear most
B)
Seatback: Upright
2. Install the child restraint system to the
front passenger s seat. Refer to Installing
child restraint systems with seatbelt F1-
39.
3. Place and secure the child (or infant)
in the child restraint system.
4. Check that the child restraint system
does not contact the head restraint. If the
child restraint system does make contact
with the head restraint, raise the head
restraint to the extended position. If the
child restraint system still makes contact,
remove the head restraint. For details,
refer to Head restraint F1-8.
– CONTINUED –
1-37

Advertisement

Table of Contents
loading

Table of Contents