Routing Information Protocol (Rip); Table 37-5 Routing Information Protocol Commands - SMC Networks TigerStack II SMC8848M Management Manual

IP R C
OUTING OMMANDS

Routing Information Protocol (RIP)

Command
router rip
default-metric
timers basic
network
neighbor
version
redistribute
ip rip receive version Sets the RIP receive version to use on a
ip rip send version
ip split-horizon
ip rip authentication
key
ip rip authentication
mode
show rip globals
show ip rip
37-8

Table 37-5 Routing Information Protocol Commands

Function
Enables the RIP routing protocol
Sets the default metric assigned to external
routes imported from other protocols
Sets basic timers, including update, timeout,
garbage collection
Specifies the network interfaces that are to
use RIP routing
Defines a neighboring router with which to
exchange information
Specifies the RIP version to use on all
network interfaces (if not already specified
with a receive version or send version
command)
Redistribute routes from one routing
domain to
another
network interface
Sets the RIP send version to use on a
network interface
Enables split-horizon or poison-reverse
loop prevention
Enables authentication for RIP2 packets
and specifies keys
Specifies the type of authentication used for
RIP2 packets
Displays global configuration settings and
statistics for RIP
Displays RIP configuration information for
each network interface
Mode Page
GC 37-9
RC 37-9
RC 37-11
RC 37-12
RC 37-13
RC 37-15
RC 37-15
IC 37-16
IC 37-17
IC 37-19
IC 37-20
IC 37-21
PE 37-22
PE 37-22