Address Table Commands; Table 4-52 Address Table Commands - SMC Networks 6824MPE INT Management Manual

C L
OMMAND INE

Address Table Commands

These commands are used to configure the address table for filtering
specified addresses, displaying current entries, clearing the table, or setting
the aging time.
Command
mac-address-table static
clear mac-address-table
dynamic
show mac-address-table
mac-address-table
aging-time
show mac-address-table
aging-time
mac-address-table static
Use this command to map a static address to a destination port in a VLAN.
Use the no form to remove an address.
Syntax
mac-address-table static mac-address interface interface vlan vlan-id
[action]
no mac-address-table static mac-address vlan vlan-id
• mac-address - MAC address.
• interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-4)
• vlan-id - VLAN ID (Range: 1-4094)
4-206
I
NTERFACE

Table 4-52 Address Table Commands

Function
Maps a static address to a port in a
VLAN
Removes any learned entries from the
forwarding database
Displays entries in the
bridge-forwarding database
Sets the aging time of the address table GC
Shows the aging time for the address
table
Mode Page
GC 4-206
PE 4-207
PE 4-208
4-207
PE 4-210