Service Dhcp - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE
Command
netbios-name-server Configures NetBIOS Windows Internet
netbios-node-type
lease
*
host
client-identifier
hardware-address
clear ip dhcp binding Deletes an automatic address binding from
show ip dhcp
binding
* These commands are used for manually binding an address to a client.

service dhcp

This command enables the DHCP server on this switch. Use the no form to
disable the DHCP server.
Syntax
[no] service dhcp
Default Setting
Enabled
Command Mode
Global Configuration
4-162
I
NTERFACE
Table 4-45 DHCP Server Commands (Continued)
Function
Naming Service (WINS) name servers
available to Microsoft DHCP clients
Configures NetBIOS node type for Microsoft
DHCP clients
Sets the duration an IP address is assigned to
a DHCP client
Specifies the IP address and network mask to
manually bind to a DHCP client
Specifies a client identifier for a DHCP client DC
*
Specifies the hardware address of a DHCP
*
client
the DHCP server database
Displays address bindings on the DHCP
server
Mode Page
DC 4-169
DC 4-170
DC 4-171
DC 4-172
4-173
DC 4-174
PE 4-175
PE, 4-176
NE