Delete; Dir - SMC Networks 8126PL2-F - annexe 1 Management Manual

4
Command Line Interface

delete

This command deletes a file or image.
Syntax
delete filename
filename - Name of the configuration file or image name.
Command Mode
Privileged Exec
Command Usage
• If the file type is used for system startup, then this file cannot be deleted.
• "Factory_Default_Config.cfg" cannot be deleted.
Example
This example shows how to delete the test2.cfg configuration file from flash memory.
Console#delete 1:test2.cfg
Console#
Related Commands

dir (4-28)

delete public-key (4-107)
dir
This command displays a list of files in flash memory.
Syntax
dir {{boot-rom: | config: | opcode:} [:filename]}
The type of file or image to display includes:
• boot-rom - Boot ROM (or diagnostic) image file.
• config - Switch configuration file.
• opcode - Run-time operation code image file.
• filename - Name of the configuration file or code image.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• If you enter the command dir without any parameters, the system displays all
files.
4-28