3.4
OIL PUMP
www.rtrucks.ru
3.4
OIL PUMP
Perform the following procedures for removal and installation of the oil pump.
3.4.1
Oil Pump Removal
Remove the oil pump assembly as follows:
1. Remove the oil pan from the cylinder block. Refer to section 3.1.1.
2. Remove the sump pipe from the oil pump. See Figure 3-11. Discard the gasket.
1. Oil Pump
2. Oil Pump Mounting Bolt
3. Gasket
4. Sump Pipe Mounting Bolt
Figure 3-11
[a] Remove the bolt attaching the sump pipe bracket to the cylinder block.
[b] Remove the two bolts attaching the sump pipe to the oil pump. Discard the gasket.
[c] Remove the sump pipe and bracket from the oil pan.
3-14
www.rtrucks.ru
Oil Pump and Sump Pipe Removal
www.rtrucks.ru
5. Sump Pipe
6. Bracket
7. Bracket Mounting Bolt
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru