Detroit Diesel MBE 4000 Service Manual page 261

www.rtrucks.ru
3. Before loosening the injector line nuts, check the thrust bolt for tightness, using the
thrust bolt torque wrench adaptor, (J 45063).
1. Injector Line Nut, Unit Pump Fitting
2. Injector Line
Figure 2-9
4. Using the injector line torque wrench adaptor (J 45062), loosen the injector line nuts at the
transfer tube and at the injector unit pump.
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
High-Pressure Injector Line Removal / Installation
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
3. Injector Line Nut, Transfer Tube Fitting
4. Thrust Bolt
www.rtrucks.ru
2-15
www.rtrucks.ru