1.14
PILOT BEARING
www.rtrucks.ru
1.14 PILOT BEARING
Perform the following procedures for removal and installation of the pilot bearing.
1.14.1
Pilot Bearing Removal
Remove the pilot bearing as follows:
1. Remove the transmission.
2. Remove the clutch from the flywheel.
3. Install a suitable pilot bearing extractor on the bearing.
4. Install a suitable puller on the extractor.
5. Remove the bearing. See Figure 1-75.
1. Flywheel
2. Guide Stud
Figure 1-75
1.14.2
Pilot Bearing Installation
Install the pilot bearing as follows:
1. Lubricate the new bearing with longlife grease.
1-100
www.rtrucks.ru
Pilot Bearing Removal
www.rtrucks.ru
3. Bearing Extractor
4. Puller
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru