Detroit Diesel MBE 4000 Service Manual page 265

www.rtrucks.ru
4. Remove the injector line. See Figure 2-10. Refer to section 2.3.1.
1. Retaining Bolt
2. Tensioning Arm
3. Nozzle
4. O-ring
5. Seal Ring
Figure 2-10
5. Remove the thrust bolt and the transfer tube. Discard the old O-ring.
6. Remove the tensioning arm.
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
Fuel Injection System (exploded view)
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
6. Constant-Throttle End Cover
7. O-ring (transfer tube)
8. Transfer Tube
9. Thrust Bolt
10. Injector Line
www.rtrucks.ru
2-19
www.rtrucks.ru