Detroit Diesel MBE 4000 Service Manual page 367

Hide thumbs Also See for MBE 4000:

Table of Contents

www.rtrucks.ru

3. Tilt the alternator back into the correct position. Install the upper alternator mounting bolt

and restore the alternator to operating condition.

4. Install the upper coolant tube onto the thermostat housing.

5. Install the coolant pump pulley and the mounting bolts attaching the coolant pump pulley

to the coolant pump. Tighten the bolts 25 N·m (18 lb·ft).

6. Move the front idler and tensioner support back into place on the cylinder block. Tighten

the mounting bolts 60 N·m (44 lb·ft).

7. Install the fan support on the cylinder block.

8. Release the belt tensioners for the main drive and fan belts. Route the two belts around

their pulleys and restore the belt tension.

9. Install the fan.

10. Fill the engine with coolant, as removed, and check for leaks.

All information subject to change without notice.

www.rtrucks.ru

MBE 4000 SERVICE MANUAL

www.rtrucks.ru

www.rtrucks.ru

Chapters

Table of Contents