Detroit Diesel MBE 4000 Service Manual page 454

7.4 EGR COOLER AND COOLER SUPPORT BRACKET
www.rtrucks.ru
17. Remove the reed valves from housing. See Figure 7-26.
1. EGR Cooler Housing
2. EGR Cooler Gasket
3. EGR Cooler Intermediate Flange
Figure 7-26
18. Remove the intermediate flange and gasket from cooler flange assembly. See Figure 7-26.
7.4.2 EGR Cooler and Support Bracket Installation
Install the EGR cooler and the EGR cooler support bracket as follows:
NOTE:
Exhaust manifold gaskets will have to be installed before EGR cooler support or cooler
can be installed. Refer to section 7.3.2.
7-34
www.rtrucks.ru
Removing the EGR Cooler Flange and Components
www.rtrucks.ru
4. EGR Reed Valve Flange
5. Reed Valves
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru