7.5
EGR CONTROL VALVE, GAS OUTLET PIPE, AND GAS MIXER
www.rtrucks.ru
6. Pull outlet pipe away from mixer and from the EGR control valve, exposing the membrane
in the control valve. See Figure 7-38.
1. Membrane
Figure 7-38
7. Remove membrane from the EGR control valve.
8. Disconnect wiring harness terminal from valve connector. See Figure 7-39.
7-46
www.rtrucks.ru
Removing the Symmetric Membrane on Gas Outlet Pipe Side
www.rtrucks.ru
2. EGR Temperature Sensor
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru