Detroit Diesel MBE 4000 Service Manual page 167

www.rtrucks.ru
[c] Install the spring garter into the ring. The garter spring joint should be positioned 180
degrees from the gap in the piston ring. See Figure 1-92.
1. Garter Spring
2. Piston Ring
Figure 1-92
5. Using ring pliers, install the rings.Make sure the word "TOP" on each ring is facing
toward the crown of the piston. Install the rings in the reverse order of their removal;
from the bottom to the top of the piston.
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
Installing the Garter Spring
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
3. Garter Spring Joint
www.rtrucks.ru
1-119
www.rtrucks.ru