Detroit Diesel MBE 4000 Service Manual page 371

www.rtrucks.ru
5. Remove the support from the cylinder block. See Figure 4-13.
1. Lower Coolant Tube
2. Mounting Bolt, Inlet Pipe
3. Inlet Pipe
4. Inlet Pipe Gasket
Figure 4-13
4.4.2
Install the front idler and tenisoner support as follows:
1. Install the front idler and tensioner support on the cylinder block. Tighten the mounting
bolts 60 N·m (44 lb·ft).
2. Install the belt tensioner on the support.
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
Front Idler and Tensioner Support (exploded view)
Front Idler and Tensioner Support Installation
www.rtrucks.ru
5. Coolant Pump Housing
6. Front Idler and Tensioner Support
7. Mounting Bolt, Front Idler and Tensioner Support
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
www.rtrucks.ru
4-23
www.rtrucks.ru