Detroit Diesel MBE 4000 Service Manual page 92

Hide thumbs Also See for MBE 4000:
Table of Contents

Advertisement

1.5
EGR FRONT AND REAR LIFTER BRACKETS
www.rtrucks.ru
2. Remove the two bolts from the rear lifter bracket. See Figure 1-33.
1. Rear Lifter Bracket Mounting Bolts
2. Vent Line Bracket
Figure 1-33
3. Remove the vent line bracket.
4. Remove the rear lifter bracket.
1.5.2
Installation of Front and Rear Lifter Brackets
Perform the following steps to install the front and rear lifter brackets:
1. Install the front lifter bracket using the four M10 x 25 mm mounting bolts. See Figure 1-32.
2. Torque the four bolts to 60 N·m (44 lb·ft).
3. Install the rear lifter bracket using two mounting bolts. See Figure 1-33.
4. Torque the two bolts to 200 N·m (147.5 lb·ft).
1-44
www.rtrucks.ru
Removal / Installation of Rear Lifter Bracket
www.rtrucks.ru
3. Rear Lifter Bracket
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru

Advertisement

Table of Contents
loading

Table of Contents