4.4
FRONT IDLER AND TENSIONER SUPPORT
www.rtrucks.ru
4.4
FRONT IDLER AND TENSIONER SUPPORT
Perform the following procedures for removal and installation of the front idler and tensioner
support.
4.4.1
Front Idler and Tensioner Support Removal
Remove the front idler and tensioner support as follows:
1. Disconnect the batteries.
2. Release the tension on the main drive belt and fan belt. Set the belts aside.
3. Remove the upper alternator mounting bolt and the lower alternator mounting bolt. Slide
the alternator backwards (towards the rear of the engine).
4. Remove the belt tensioner from the front idler and tensioner support.
4-22
www.rtrucks.ru
www.rtrucks.ru
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru