1.3
CYLINDER BLOCK
www.rtrucks.ru
5. Install the dial gauge so that the feeler on the dial gauge extends into the slot in the
measuring plate. The feeler must touch the contact surface of the cylinder block with
some preload. Support the dial gauge. See Figure 1-27.
1. Dial Gauge
2. Slot (4 qty.)
Figure 1-27
1-38
www.rtrucks.ru
Dial Gauge Installation
www.rtrucks.ru
3. Feeler
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru