www.rtrucks.ru
Do not damage the camshaft bearings in the crankcase. If
the camshaft bearings are damaged, the crankcase will have
to be replaced.
12. Attach the camshaft guide tool (J 46183 or 457 589 00 14 00) to the front of the camshaft.
See Figure 1-132.
1. Front of Camshaft
Figure 1-132
13. From the gear end (rear of the engine), carefully remove the camshaft from the block.
See Figure 1-132.
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
NOTICE:
Attaching the Camshaft Guide Tool
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
www.rtrucks.ru
1-173
www.rtrucks.ru