1.4
EGR CYLINDER HEAD AND BLOCK
www.rtrucks.ru
1.4.4
Cylinder Block Changes
The cylinder block has two additional openings machined in the block. There is now an opening
near the air compressor housing and an opening flange for attaching the coolant inlet pipe going
to the EGR cooler.See Figure 1-31.
1. Opening near the air compressor housing
Figure 1-31
1-42
www.rtrucks.ru
EGR Cylinder Block Changes
www.rtrucks.ru
2. Flange for attaching coolant inlet pipe
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru